Zombie Advanced Settings Guide

Following are the steps to edit the udev entry of DUT attached to Zombie:

1. Login to Zombie E-Z Configurations application with the credentials:
   Username:<Admin Username>
   Password:<Password for Admin>
2. Zombie Network Settings page will appear on the screen by default.
3. In the left pane, click on Advanced settings option to view & edit udev entries of DUT’s.
   
4. The Advanced Settings page will appear on the screen with default value in each field as:
   
5. Select Edit checkbox to change the Advanced Settings. The following message appears on the screen.
   
6. The fields on the Advanced Settings are editable.
   
7. Select Scan button corresponding to the selected DUT Zombie UDEV as shown.
   
8. If Device is not connected to the selected DUT Port then following message appears.
   
9. If device is connected to DUT Port, then udev options appear on the screen as:
   
   Select the available DUT udev option.
   
10. Select Save button to save Advanced Settings.
11. After making changes in udev entries in Advanced Settings, click on Reboot button available on the left pane to save the edited Advanced Settings.
    
12. Reverify all the updated changes by logging in again on Zombie E-Z Configuration Application.
    

How to restore Default Settings

Following are the steps to restore default settings of Zombie E-Z configuration application:

1. Login to Zombie E-Z Configurations application as:
   Username:<Admin Username>
   Password:<Password for Admin>
2. After logging in Zombie E-Z Config application, Zombie Network Settings page will appear on the screen.
3. In the left navigation button,Select Advanced Settings page.
   
4. The Advanced Settings page will appear on the screen:
   
5. Select Default Settings to restore the default values.
   
6. A message will appear on the screen for the confirmation to restore default values, click on Ok button.
   
7. All the updated changes will be deleted and default values will be restored.